Instrumenti za ispitivanje električnih instalacija

DUSPOL ® digital 1000

Digital TRMS Voltage Tester with Resistance/Frequency Range Suitable for electrical engineering, industry, maintenance and service (troubleshooting) Voltage from 1 - 1000 V AC TRMS / 1200 V DC (LCD) Display levels: 50, 1

Zatraži ponudu

Digital TRMS Voltage Tester with Resistance/Frequency Range

DUSPOL ® digital 1000

Suitable for electrical engineering, industry, maintenance and service (troubleshooting)

Sertifikati DUSPOL ® digital 1000

  • Voltage from 1 – 1000 V AC TRMS / 1200 V DC (LCD)
  • Display levels: 50, 120, 230, 400 V AC/DC (LED)
  • Backlit double display for displaying frequency (small display) and voltage (large display) or resistance
  • Optical continuity test up to 100 kΩ (yellow LED)
  • Resistance measurement: 0.1 kΩ – 300 kΩ (LCD)
  • Diode test: 0.3 – 2 V (LCD)
  • Phase sequence test (green LED) / phase test (red LED)
  • Polarity test (LCD)
  • Frequency measurement: 1 – 1000 Hz
  • Direct display without key acknowledgment (high impedance testing)
  • Load switched via pushbutton (high impedance testing)
  • Intentional tripping of the RCCB
  • Vibration alarm in the tester handle
  • Illumination of measuring points and display
  • IP65 protection (dust-proof / protected against water jets)
  • Rugged housing design with rubberized handle
  • Overvoltage category: CAT IV 600 V, CAT III 1000 V
  • Includes two 1.5 V AAA batteries (LR03) (voltage display as of 50 V even with dead batteries!)
  • Tested and approved in accordance with DIN EN 61243-3, VDE 0682-401:2011-02

 

DUSPOL ® analog 1000DUSPOL ® expert 1000DUSPOL® digital 1000  

Technical Data DUSPOL ®
analog 1000
DUSPOL ®
expert 1000
DUSPOL®
digital 1000
Display Moving coil /
LED
LED    LED / LCD
Display levels 12 – 1000 V
AC/DC
12 – 1000 V
AC/DC
1 – 1000 V AC/
1200 V DC
Frequency measuring range 1 – 1000 Hz
Acoustic and optical continuity test Buzzer + LED
0 – 100 kΩ
Buzzer + LED
0 – 100 kΩ
Diode test
 
Forward/
reverse direction
0.3 – 2.0 V
Resistance measuring range 0.1 – 300 kΩ
Phase sequence test LCD (R symbol) Green LEDs (right/left) Green LEDs (right/left)
Single-pole phase test LCD (R symbol) Red “flash” LED Red “flash” LED
Polarity test LED (+/-) LED (+/-) LED (+/-)
Broken wire detector Yellow LED (blinking) Yellow LED (blinking)
Load switched
via pushbutton
 
IS = 600 mA (1000 V) IS = 550 mA (1000 V) IS = 550 mA (1000 V)
30 mA RCCB tripping
Vibration alarm Yes Yes Yes
Measuring point illumination White LED White LED
Protection IP65 IP65 IP65
Article number M611D    M611E    M611F
Servis

Prijava instrumenta na servis

Popunite podatke o instrumentu i kvaru — javljamo se sa procenom i rokovima.